0轴上方出现红色柱子，是做多信号。0轴上方出现青蓝色柱子是减仓信号。0轴下方出现绿色柱子是做空信号，0轴下方出现洋红色柱子是空头回补信号。 DEA:EMA(DIFF,9),COLORFFFF00;
MACD:(DIFF-DEA)*2;
STICKLINE(MACD>0 AND MACD>=REF(MACD,1),0,MACD,5,0),color0000ff;
STICKLINE(MACD>0 AND MACD<REF(MACD,1),0,MACD,5,0),colorffff00;
STICKLINE(MACD<0 AND MACD>=REF(MACD,1),0,MACD,5,0),colorff00ff;
STICKLINE(MACD<0 AND MACD<REF(MACD,1),0,MACD,5,0),color00ff00;
DRAWICON(CROSS(DIFF,DEA),DEA,1);
DRAWICON(CROSS(DEA,DIFF),DEA,2);
gj:=MAX(C,O);
L4:=LLV(gj,4);
jl:=(HHV(diff,55)-LLV(diff,55))/5;
gt:=dea>REF(dea,1) AND REF(dea,1)<REF(dea,2);
A1:=BARSLAST(REF(gt,1));
底背离:=REF(L4,A1+1)>CLOSE AND diff>REF(diff,A1+1) AND gt;
DRAWLINE(A1=0,DEA,底背离,REF(DEA,A1),0),colorred,LINETHICK2;
DRAWLINE(底背离,DEA,底背离,REF(DEA,A1),0),colorred,LINETHICK2;
DRAWTEXT(底背离,REF(DEA,A1)*1.18,' 底背'),COLORFF00FF;
H4:=HHV(gj,4);
gt2:=dea<REF(dea,1) AND REF(dea,1)>REF(dea,2);
A2:=BARSLAST(REF(gt2,1));
顶背离:= REF(H4,A2+1)<H4 AND diff<REF(diff,A2+1) AND gt2;
DRAWLINE(A2=0 ,DEA,顶背离,REF(DEA,A2),0),colorgreen,LINETHICK2;
DRAWLINE(顶背离,DEA,顶背离,REF(DEA,A2),0),colorgreen,LINETHICK2;
DRAWTEXT(顶背离,REF(DEA,A2)*1.18,' 顶背'),colorgreen;
A0:=DIFF<0 AND DEA<0;
A11:=A0>REF(A0,1);
A3:=BARSLAST(A11);
A4:=COUNT(DEA>0 AND DIFF >0,A3)=0;
A5:=CROSS(DIFF ,DEA);
A6:=BARSLAST(A5);
A7:=REF(A6,A6+1)+A6;
A8:=(DIFF+DEA)/2;
A9:=(HIGH+LOW)/2;//www.fxjgsw.com
A10:=A5 AND A7<A3 AND A4 AND A8>REF(A8,A7) AND A9<REF(A9,A7) AND MACD>0;
DRAWTEXT(A10,DIFF*0.95,'★金叉'),coloryellow;
VAR1:=SMA(AMOUNT/10,10,1)/10000;
VAR2:=REF(VAR1,1);
VAR1=HHV(VAR1,20);
多转空:=((((LLV(MACD,4)>0) AND (MACD<REF(MACD,1))) AND (REF(MACD,1)>REF(MACD,2))) AND (REF(MACD,2)>REF(MACD,3)));
空转多:=((((HHV(MACD,4)<0) AND (MACD>REF(MACD,1))) AND (REF(MACD,1)<REF(MACD,2))) AND (REF(MACD,2)<REF(MACD,3)));
DRAWICON(多转空,MACD,2);
DRAWICON(空转多,MACD,1);
|
