MACD指标说明 MACD指数平滑异同移动平均线为两条长、短的平滑平均线。
其买卖原则为:
1.DIFF、DEA均为正,DIFF向上突破DEA,买入信号参考。
2.DIFF、DEA均为负,DIFF向下跌破DEA,卖出信号参考。
3.DEA线与K线发生背离,行情可能出现反转信号。
4.分析MACD柱状线,由红变绿(正变负),卖出信号参考;由绿变红,买入信号参考。
DIFF : EMA(CLOSE,12) - EMA(CLOSE,26);
DEA : EMA(DIFF,9);
MACD=2*(DIFF-DEA);
Zero : 0;
gj:=MAX(C,O);
STICKLINE(MACD>0 AND MACD>=REF(MACD,1),0,MACD,2,0),color0000ff;
STICKLINE(MACD>0 AND MACD<REF(MACD,1),0,MACD,2,0),colorffff00;
STICKLINE(MACD<0 AND MACD>=REF(MACD,1),0,MACD,2,0),colorff00ff;
STICKLINE(MACD<0 AND MACD<REF(MACD,1),0,MACD,2,0),color00ff00;
L4:=LLV(gj,4);
jl:=(HHV(diff,55)-LLV(diff,55))/5;
gt:=dea>REF(dea,1) AND REF(dea,1)<REF(dea,2);
A1:=BARSLAST(REF(gt,1));
底背离:=REF(L4,A1+1)>CLOSE AND diff>REF(diff,A1+1) AND gt;
DRAWLINE(A1=0,DEA,底背离,REF(DEA,A1),0),colorred,LINETHICK2;
DRAWLINE(底背离,DEA,底背离,REF(DEA,A1),0),colorred,LINETHICK2;
DRAWTEXT(底背离,REF(DEA,A1)*1.18,' 底背'),COLORFF00FF;
H4:=HHV(gj,4);
gt2:=dea<REF(dea,1) AND REF(dea,1)>REF(dea,2);
A2:=BARSLAST(REF(gt2,1));
顶背离:= REF(H4,A2+1)<H4 AND diff<REF(diff,A2+1) AND gt2;
DRAWLINE(A2=0 ,DEA,顶背离,REF(DEA,A2),0),colorgreen,LINETHICK2;
DRAWLINE(顶背离,DEA,顶背离,REF(DEA,A2),0),colorgreen,LINETHICK2;
DRAWTEXT(顶背离,REF(DEA,A2)*1.18,' 顶背'),colorgreen;
A0:=DIFF<0 AND DEA<0;
A11:=A0>REF(A0,1);
A3:=BARSLAST(A11);
A4:=COUNT(DEA>0 AND DIFF >0,A3)=0;
A5:=CROSS(DIFF ,DEA);
A6:=BARSLAST(A5);
A7:=REF(A6,A6+1)+A6;
A8:=(DIFF+DEA)/2;
A9:=(HIGH+LOW)/2;
A10:=A5 AND A7<A3 AND A4 AND A8>REF(A8,A7) AND A9<REF(A9,A7) AND MACD>0;
DRAWTEXT(A10,DIFF*0.95,'★金叉'),coloryellow;
VAR1:=SMA(AMOUNT/10,10,1)/10000;
VAR2:=REF(VAR1,1);
VAR1=HHV(VAR1,20);
多转空:=((((LLV(MACD,4)>0) AND (MACD<REF(MACD,1))) AND (REF(MACD,1)>REF(MACD,2))) AND (REF(MACD,2)>REF(MACD,3)));
空转多:=((((HHV(MACD,4)<0) AND (MACD>REF(MACD,1))) AND (REF(MACD,1)<REF(MACD,2))) AND (REF(MACD,2)<REF(MACD,3)));
DRAWICON(多转空,MACD,2);
DRAWICON(空转多,MACD,1);
LC:=REF(CLOSE,1);
RSI5:=((SMA(MAX((CLOSE - LC),0),5,1) / SMA(ABS((CLOSE - LC)),5,1)) * 100);
TR1:=SUM(MAX(MAX((HIGH - LOW),ABS((HIGH - REF(CLOSE,1)))),ABS((LOW - REF(CLOSE,1)))),10);
HD:=(HIGH - REF(HIGH,1));
LD:=(REF(LOW,1) - LOW);
DMP:=SUM(IF(((HD > 0) AND (HD > LD)),HD,0),10);
DMM:=SUM(IF(((LD > 0) AND (LD > HD)),LD,0),10);
PDI:=((DMP * 100) / TR1);
MDI:=((DMM * 100) / TR1);
ADX:=MA(((ABS((MDI - PDI)) / (MDI + PDI)) * 100),5);
AV:=(RSI5 + ADX);
DXR:=(((ADX + REF(ADX,5)) / 2) + RSI5);
WR10:=((100 * (HHV(HIGH,10) - CLOSE)) / (HHV(HIGH,10) - LLV(LOW,10)));
NEWVOL:=(RSI5 - WR10);
阶段底部:=(AV + NEWVOL);
出击:CROSS(阶段底部,0);
DIF3:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA3:=EMA(DIF3,9);
MACD3 := 2*(DIF3-DEA3);
RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100;
K:=SMA(RSV,3,1);
D:=SMA(K,3,1);
J:=3*K-2*D;
止跌:MACD3>REF(MACD3,1) AND REF(MACD3,2)>=REF(MACD3,1) AND J<50 AND C>REF(C,1) AND C>O AND J>REF(J,1);
N1:=12;
N2:=26;
N3:=9;
DIFF:=(EMA(CLOSE,N1) - EMA(CLOSE,N2));
DEA:=EMA(DIFF,N3);
MACD2:=(2 * (DIFF - DEA));
DU0:=CROSS(DIFF,0);
UD0:=CROSS(0,DIFF);
TDU0:=BARSLAST(DU0);
TUD0:=BARSLAST(UD0);
DU3:=REF(DU0,1);
UD3:=REF(UD0,1);
TDU3:=BARSLAST(DU3);
TUD3:=BARSLAST(UD3);
UDGLINE:=IF((TDU3 < TUD3),REF(HHV(HIGH,2),TDU3),REF(LLV(LOW,2),TUD3));
JDU0:=(((REF(CLOSE,1) <= REF(UDGLINE,1)) AND (CLOSE > UDGLINE)) AND (TDU0 < TUD0));
JUD0:=(((REF(CLOSE,1) >= REF(UDGLINE,1)) AND (CLOSE < UDGLINE)) AND (TUD0 < TDU0));
JDU1:=(JDU0 AND (COUNT(JDU0,TDU0) = 1));
JUD1:=(JUD0 AND (COUNT(JUD0,TUD0) = 1));
JDU2:=(JDU1 AND (REF(BARSLAST(JUD1),1) < REF(BARSLAST(JDU1),1)));
JUD2:=(JUD1 AND (REF(BARSLAST(JUD1),1) > REF(BARSLAST(JDU1),1)));
JDU3:=(JDU1 AND (REF(BARSLAST(JUD1),1) > REF(BARSLAST(JDU1),1)));
JUD3:=(JUD1 AND (REF(BARSLAST(JUD1),1) < REF(BARSLAST(JDU1),1)));
BSLINE:=IF((BARSLAST(JDU2) < BARSLAST(JUD2)),IF(REF(CROSS(0,MACD2),1),LLV(LOW,2),REF(LLV(LOW,2),BARSLAST(REF(CROSS(0,MACD2),1)))),IF(REF(CROSS(MACD2,0),1),HHV(HIGH,2),REF(HHV(HIGH,2),BARSLAST(REF(CROSS(MACD2,0),1)))));
STICKLINE((MACD2>=0),0,MACD2,2,0),COLORFF00FF;
STICKLINE(((MACD2>=0) AND (MACD2 < REF(MACD2,1))),0,MACD2,2,1),colorgreen;
STICKLINE((MACD2<0),0,MACD2,2,0),COLORFFFF00;
STICKLINE(((MACD2<0) AND (MACD2 > REF(MACD2,1))),0,MACD2,2,0),coloryellow;
DEFUT:=BARSLAST(CROSS(MACD2,0));
DEFDT:=BARSLAST(CROSS(0,MACD2));
DEFUL:=IF((MACD2 >= 0),HHV(MACD2,(DEFUT + 1)),REF(HHV(MACD2,(DEFUT + 1)),(DEFDT + 1)));
DEFDL:=IF((MACD2 < 0),LLV(MACD2,(DEFDT + 1)),REF(LLV(MACD2,(DEFDT + 1)),(DEFUT + 1)));
DEFU2L:=REF(DEFUL,(DEFUT + 1));
DEFD2L:=REF(DEFDL,(DEFDT + 1));
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
STICKLINE(底背离,0,0.5,4,0),colorwhite;
DIF2:EMA(SUM(MACD2,2),3),LINETHICK2,coloryellow;
入1:IF(DIF2>REF(DIF2,1),DIF2,DRAWNULL),colorred,LINETHICK2;
入2:IF(DIF2<REF(DIF2,1),DIF2,DRAWNULL),colorgreen,LINETHICK2;
DEA2:MA(DIF2,5),colorcyan;
diff:=EMA(C,12)-EMA(C,26);
dea:=EMA(diff,9);
第一红柱:CROSS(diff,dea);
VAR1:=SMA(AMOUNT/10,10,1)/10000;
VAR2:=REF(VAR1,1);
VAR1=HHV(VAR1,20);
|
评论内容只代表网友观点,与本站立场无关!
本网提供的公式文件说明:
* alg格式飞狐股票公式,可以用飞狐交易师或者交易师软件导入;
* fnc格式大智慧新一代公式指标,可以用大智慧股票软件使用,少部分可以用分析家股票软件引入使用;
* exp格式大智慧经典版股票公式,仅可以用大智慧经典版股票软件引入使用;
* tni和tnc格式通达信股票公式,仅可以用通达信新引入使用,例如可以用通达信股票软件引入使用;
* tne,tn6格式通达信公式,可以用通达信公式编辑器5.0版导入,推荐通达信金融终端版本;
* hxf格式同花顺股票公式,仅可以用同花顺股票软件引入使用。
以上的各种软件都可以在本网股票软件栏目找到!
* 关于股票公式时间限制,如果在引入大智慧公式,交易师公式或者飞狐公式的时候,发现公式名称栏是空白的,这时候调整电脑时间到1997年,又能出现公式名称,并且能正常显示,可能是公式使用期限已过。
* 关于还原公式源码如果你忘记了自己编写的大智慧公式,通达信公式,同花顺公式,操盘手公式,飞狐公式,博易大师公式,金字塔公式,文华公式和交易师公式等等公式的密码,本网可帮恢复源码,有.偿.服.务无意勿扰,点击在线咨询联系我。
* 关于股票公式源码编辑
本网提供的源码,一般都可以编辑成公式,如果不明白公式的编辑,在本页右侧教程录像可参考,或者找公式教程资料学习,请搜索:教程
* 如果您发现软件内容或者链接错误,请点击报告错误谢谢!
* 站内提供的所有软件包含源码均是由网上搜集,若侵犯了你的版权利益,请联系通知我们!